This item has been added to My eBay for Guests. As a guest, you can: Track up to 10 items on this computer in My eBay Receive an email reminder for this item a few hours before it ends
Seller assumes all responsibility for listing this item.
We
have another DIY CNC Machines for sell and hope provide high efficiency
and low price machine for you. If you are interested in any machines,
please feel free to contact us!
CNC Machines: All
of machines set are included the following items: 1. A CNC Machine body with 3 Stepping Motors (New/ Used); 2. A DIY Control Box (New); 2.1. A CNC controller and a 24V Switching Power Supply (New); 2.2 Miller Power Supply(only for DC Miller) (New); 3. A AC/DC type Miller (New/Used); Today, we are provided two option for your selection! They are the "Completed Set Option" and the "DIY Connection Option".
A. Completed Set Option: This is for the beginner of CNC Machine. You just connect some connectors before using the machine. Do not need to do wiring.
Advantage :
1) You can use the CNC system immediately after received; 2) Do not worry about the system burning problem and wrong connection.
Disadvantage:
1) Our Manufacturing Period will be long. 2) The machine system cost is higher. 3) The shipping cost will also be increased by the Control Box.
B. DIY Connection Option: This is for user with some experiment. We provide the connection diagram for your to follow!
Advantage :
1) It can reduce the machine system cost, shipping cost and our Manufacturing Period; 2) You can create and build your own control box.
Disadvantage:
1) You can not use the CNC system immediately after received; 2) The system may be burned by your wrong connection.
Each
machine set will also pass testing before shipping. Users need to assemble few parts and connect some cables when received.
In
addition, you should have a PC with parapllel port(LPT), some cutting
tools and electrical power to start working with the CNC Machine.
1) Economic Machine
Item
Model
Working Spacing(mm)
Price(USD)
Weight
Remarks
X
Y
Z
eBay
(kg)
1.
CNC 3015
300
150
50
6XX.xx
20
Low Price
2.
CNC 3030
300
300
100
6XX.xx
30
Low Price
3.
CNC 3020
300
200
50
8XX.xx
25
Similar to CNC 3020 DC
4.
CNC 3040
300
400
60
9XX.xx
35
Similar to CNC 3020 DC
2) Professional CNC machine
Item
Model
Working Spacing(mm)
Price(USD)
Weight
Remarks
X
Y
Z
ebay
(kg)
1
CNC 3641 DC
360
410
100
1XXX.xx
45
N/A
2
CNC 3641 DC
360
410
100
1XXX.xx
45
Similar to CNC 3020
3) Additional Part
i) 4 th Axis Part
Item
Model
Work piece Diameter(mm)
Stepping Motor Type
Three-jaw chuck Type
Price(USD) ebay
Price (USD) (2) with machine set
Weight (kg)
1
4AX4250
1 - 48
42
50mm
2XX.xx
2XX.xx
10
2
4AX5763
1 - 50
57
63mm
3XX.xx
3XX.xx
10
Remarks: (1) There are included a used worm gear reducer with ratio 1:30 and turning precision of 0.03mm. (2) i) CNC controller change The A3977 4 axes controller must be requested, the charge of changing from 3 axes to 4 axes is included. ii) Shipping cost The shipping cost is not included. A) Software A licensed copy of Mach3 is USD175. B) Manufacturing Period We will make your machine after your payment! The process is about 10
to 20 working days.
C) Shipping Cost About the shipping cost, we select Hong Kong Speed Post service, Air mail service and Flat mail service by Hong Kong Post.
Remarks: The weight is about 20-30kg of above machines. We will list your requested item on ebay for sell.
CNC 3030 AC (2 QTY.)
Specification:
1. Effective Travel:
X * Y * Z = 300mm X 330mm X 100mm 2. Dimensions:
500mm X 450mm X 400mm 3. Stepping Motor:
2 two-phase 3.1V/1.5A (Used) 4. Sliding units:
X-axis - Φ16mm chrome hardware axis + matching box-type slider
Y-axis - Φ16mm with support straight track + matching box-type slider
Z-axis - Φ16mm chrome hardware axis + linear bearings
5.Actual carving precision:
0.1mm (carving different hardness materials vary) 6.Repeat positioning accuracy:
0.1mm 7.The largest rate of blank lines:
4000mm/min 8.Engraving speed:
0 ~ 2000mm/min 9.Spindle motor:
AC 100~ 220V 10.Spindle Speed:
0 ~ 36000 RPM around 11.Tool clamping range:
0.4 ~ 4mm 12.machine weight:
25KG (excluding packaging)
13. Acceptable Processing materials PVC, PCB, Plastic, Woods, Brass and Aluminum
The full set of CNC 3030 AC is included: 1. A CNC 3030 AC machine (New); 2. 3 stepping motors (Used); 3. A A3977 3 Axis CNC driver board set (New); 4. A 24V switch power supply (New); 5. A AC miller (AC100V~220V) (New); 6. A Parallel Cable. 7. A CNC Control Box
AC type miller
The AC miller is high speed and low price, but large noise.
It is not stable, it will be jumping when running at high
speed. It is not suitable for high accuracy processing at high speed.
Software Use: 1. Mach 2/3 2. KCAM 3. EMC
Not included:
1. Cutting Tools.
Samples:
Reminder: Please Contact cncdiy@ymail.com before your bidding and answering.
Return policy not specified. Read item description for any reference to return policy.
Refunds by law: In Australia, consumers have a legal right to obtain a refund from a business for goods purchased (but not at auction) if the goods are faulty, not fit for purpose or don't match description. More information at returns.
Payment details
Payment method
Preferred/Accepted
Buyer protection on eBay
Seller Preferred
eBay prohibits the use of instant cash transfer services such as Western Union or Moneygram. Learn about payment methods
Track up to 10 items on this computer in 
)
)
